Metal Roofing Supplier in Idaho: Buyer Tips

If you’re looking for a metal roofing supplier in Idaho, the honest answer is to buy from someone who roll-forms the panels close to your job. You get panels cut to the lengths your roof needs, trim that matches, and a real person to call when the order changes.

Metal America roll-forms in Post Falls, Idaho, with a second office in Spokane Valley, Washington, and ships across Idaho, Washington, Oregon and Montana. Here’s what an Idaho roof asks of its panels, what to ask any supplier before you order, and how to tell the different kinds of sellers apart. No sales pitch, just the information you need.

Who sells metal roofing in Idaho

Four kinds of businesses show up when you search, and they don’t sell the same thing:

Roll-formers run coil steel through a forming line and cut panels to length for your order. That’s what we do in Post Falls.
Distributors resell panels made somewhere else. They can be a good fit, but you’re a step removed from the people making the product.
Big-box stores stock a few stock lengths and colors. Fine for a shed, limiting for a house or a shop.
Installers buy from one of the above and put it on your roof.

Our guide to finding metal roofing near me goes deeper on how each one prices and what they can and can’t do for you.

Coils of painted steel at Metal America, the stock a metal roofing supplier in Idaho roll-forms into panels

What an Idaho roof asks of a metal roofing supplier

Snow load

Idaho’s snow loads swing a lot from one town to the next, and elevation drives most of that. The University of Idaho ground snow load study is the reference most building departments start from, and your local building department sets the number for your site. A good supplier asks for that number before quoting, because it affects which gauge makes sense and how far apart your framing should be. Heavier snow pushes you toward 24 gauge and a steeper pitch that sheds better. Our guide to snow load metal roofing covers the panel side, and snow guards for metal roofs covers what to do about snow sliding off over a door or a walkway.

Wildfire

Much of Idaho is wildfire country now, and steel panels don’t burn. A metal roof won’t make a house fireproof on its own, but it takes the most exposed surface off the list. Here’s our plain-English order of operations on how to protect your home from wildfire.

Freeze, thaw and sun

Wet springs, dry summers and hard freezes are tough on paint. That’s why the paint system matters as much as the steel. Our 26 and 29 gauge stock colors use Sherwin-Williams WeatherXL SMP coatings with a 40-year paint warranty, and our 24 gauge premium colors use a PVDF finish.

Questions to ask any metal roofing supplier in Idaho

Ask this	Why it matters
Do you roll-form the panels yourself, and where?	A local roll-former can cut to your exact lengths and fix a short order fast.
Which gauges do you run?	We run 22, 24, 26 and 29. 26 gauge is the most popular, and 24 gauge is the best balance of strength and cost where snow is a concern. Our metal roofing gauge guide compares all four.
What paint system and warranty come with it?	Two panels in the same color can carry very different coatings. Ask for the paint system by name.
Will the trim match?	Trim is where roofs leak, and mismatched trim is the first thing people notice. We roll trim in the same colors as the panels.
Can I see colors before I order?	Screens lie about color. Our color sample chips are free. Full-size panel samples aren’t, so ask for a quote.
Do you install?	We don’t. We roll the steel and work with the contractors who put it on. Here’s how to vet a steel roofing contractor.

What we roll in Post Falls

Standing seam (concealed fastener): QuickLoc™, 1.5″ Snap Lock, 1.75″ Snap Lock and Mechanically Seamed.

Exposed fastener: Tuff Rib, PBR Panel, 7/8″ Corrugated and the 7.2 Panel.

Wall panels: Board & Batten, Flush Wall / Soffit, Shiplap and Double Lap.

Finishes include 44+ solid colors, wood-look prints like Barnwood and Smooth Cedar, and Cor-Ten weathering steel.

Pole barn in Coeur d'Alene, ID with Barnwood steel siding and a Burnished Slate roof from a metal roofing supplier in Idaho

Visiting us

Our Post Falls showroom is at 7728 Corn Maze Way. It’s open Monday to Thursday, 7 AM to 4 PM, and Friday, 7 AM to 2 PM, and walk-ins are welcome. Our Spokane Valley office is at 13520 E Nora Ave and is open Monday to Friday, 8 AM to 4 PM. You can also call us at 855-638-2587.

FAQ

Do you sell to homeowners or only to contractors?

Both. Homeowners can request a quote or free color samples, and contractors can ask about contracted and wholesale pricing.

Do you ship outside Idaho?

Yes. We ship across Idaho, Washington, Oregon and Montana.

What gauge should I use in north Idaho?

It depends on your snow load and how far apart your framing is. Where snow load is a concern, 24 gauge is the usual pick. Our guide to purlins and purlin spacing explains how the framing under the panels plays into it.

Bottom line

The best metal roofing supplier in Idaho for your job is one that rolls panels near you, asks for your snow load before it quotes, names its paint system, and matches its trim. If you’d like us to price your roof, send us the dimensions, give us a call, or request free color samples and we’ll get them in the mail.

Metal Roofing Supplier in Idaho: What to Ask Before You Buy