If you’re looking for a metal roofing supplier in Washington, the honest answer is to buy from someone who roll-forms panels close to your job, asks whether you’re building on the wet west side or the snowy east side, and cuts every panel to the length your roof needs.

Metal America roll-forms in Post Falls, Idaho, just across the state line from Spokane, and runs a second office in Spokane Valley, Washington. We ship across Washington, Idaho, Oregon and Montana. Here’s what a Washington roof asks of its panels, the questions worth asking any supplier, and what we roll. No sales pitch, just the information you need.

Two climates, one state

Washington roofs don’t all face the same weather, and a good supplier will ask which side of the Cascades you’re on before recommending a panel.

West of the Cascades: long wet seasons

On the west side, the roof’s main job is shedding steady rain for months at a time. Metal sheds water fast and gives moss less to hold onto than shingles do. What matters most here is the paint system, well-sealed laps and trim, and enough slope for the panel you pick. Standing seam panels hide their fasteners, so there are fewer holes through the roof to keep sealed.

East of the Cascades: snow, cold, and wildfire

From Spokane to Wenatchee to the Okanogan, snow load and wildfire take over. Snow loads swing a lot with elevation, and your local building department sets the number for your site. Heavier snow pushes you toward 24 gauge panels and closer framing. Our guide to snow load metal roofing covers the panel side. Steel panels don’t burn, which takes the most exposed surface of the house off the list in fire season. Here’s our plain-English order of operations on how to protect your home from wildfire.

What a good metal roofing supplier in Washington should do

• Roll-form the panels itself. A roll-former cuts panels to your exact lengths, so you’re not lapping short stock lengths on a long roof.

• Ask for your snow load before it quotes. That number decides gauge and framing, and a quote that skips it is a guess.

• Name the paint system. Two panels in the same color can carry very different coatings and warranties.

• Roll matching trim. Trim is where roofs leak, and mismatched trim is the first thing people notice.

Our guide to finding metal roofing near me explains how roll-formers, distributors, big-box stores and installers differ, and why that changes what you get.

Questions to ask any metal roofing supplier in Washington

What we roll for Washington roofs

Standing seam (concealed fastener): QuickLoc™, 1.5″ Snap Lock, 1.75″ Snap Lock and Mechanically Seamed.

Exposed fastener: Tuff Rib, PBR Panel, 7/8″ Corrugated and the 7.2 Panel.

Wall panels: Board & Batten, Flush Wall / Soffit, Shiplap and Double Lap.

Finishes include 44+ solid colors, wood-look prints like Barnwood and Smooth Cedar, and Cor-Ten weathering steel. Our 26 and 29 gauge stock colors use Sherwin-Williams WeatherXL SMP coatings with a 40-year paint warranty, and our 24 gauge premium colors use a PVDF finish.

Visiting our Spokane Valley office

Our Spokane Valley office is at 13520 E Nora Ave and is open Monday to Friday, 8 AM to 4 PM. Our Post Falls showroom is at 7728 Corn Maze Way, open Monday to Thursday, 7 AM to 4 PM, and Friday, 7 AM to 2 PM, and walk-ins are welcome. You can also call us at 855-638-2587.

FAQ

Do you sell to homeowners or only to contractors?

Both. Homeowners can request a quote or free color samples, and contractors can ask about contracted and wholesale pricing.

Do you supply western Washington too?

Yes. We ship across Washington, plus Idaho, Oregon and Montana.

Do I need a registered contractor to install a metal roof in Washington?

If you’re hiring someone, Washington requires construction contractors to be registered with the state. You can check a contractor’s registration with the Washington L&I verify tool before you sign.

What gauge should I use in eastern Washington?

It depends on your snow load and how far apart your framing is. Where snow load is a concern, 24 gauge is the usual pick.

Bottom line

The best metal roofing supplier in Washington for your job rolls panels near you, knows which side of the mountains you’re building on, asks for your snow load, names its paint system, and matches its trim. If you’d like us to price your roof, send us the dimensions, give us a call, or request free color samples and we’ll get them in the mail.