First Published: March 27, 2026 Last Update: April 15, 2026
Metal America Post Falls: Metal Roofing & Siding are Manufactured Here
Post Falls, Idaho isn’t just a city Metal America serves, it’s where Metal America was built. Our manufacturing facility at 7728 Corn Maze Way is the origin point of every panel we produce: this is where the steel coil arrives, where it goes through our rolling equipment, and where it leaves as finished roofing and siding panels headed for job sites across Idaho, Washington, Oregon, and Montana.
Contractors and homeowners in Post Falls, Rathdrum, Hayden, or Coeur d’Alene visiting Metal America Post Falls, discover the source of the product. Not a distributor, not a warehouse. The manufacturer. That distinction matters because it is the reason our pricing is competitive, our turnaround is fast, our quality is consistent, and our staff actually knows what they’re talking about.
Did you know we also have a sales and distribution center in Spokane Valley, WA?
The Post Falls Facility: Where Metal America Panels Are Made
Metal America’s Post Falls facility is a steel coil processing operation, which is a specific and meaningful distinction from a distributor or reseller. We receive steel coil, run it through our own roll-forming equipment, and produce finished panels and trim to order. Everything that leaves this facility is manufactured on-site.
What that means in practice for Post Falls-area buyers:
- Direct pricing: There is no distributor markup between the factory and your order. The price you pay reflects manufacturing cost, not a resale margin on top of it. Learn more about steel panel costs here.
- Custom lengths: Because we roll our own panels, we can produce any length to order. Standard stock is available same-day; custom lengths are typically ready within a few business days.
- Consistent quality: Every panel comes from the same equipment, the same process, and the same quality standards. You get the same product on your tenth order as your first.
- Fast turnaround: No waiting for a manufacturer to fulfill a distributor’s order before it reaches you. We make it here and you pick it up here.
- Real product knowledge: Our Post Falls team includes people with hands-on installation experience. When you call or come in with a technical question, you’re talking to people who understand metal roofing from the installation side, not just the sales side.
Founded in Post Falls by people who built things here
Metal America was founded by brothers Shawn Sternberg (CEO) and Justin Sternberg (COO), who spent 25 years installing metal roofing and siding throughout North Idaho and Eastern Washington before starting the company. The supply shortages of 2020–2021 made clear that the region needed a reliable local manufacturer. That’s what they built, right here in Post Falls.
Discover what makes Metal America better than the competition.
Metal Roofing Panels Available in Post Falls
Every Metal America roofing panel is available for pickup at our Post Falls location or delivery throughout the surrounding region. The full lineup covers standing seam, exposed fastener, and architectural profiles in 44+ colors and 11 exclusive wood-look finishes.
Standing Seam: Concealed Fastener Systems
Standing seam is the highest-performing metal roofing system and the fastest-growing residential roofing choice in the Post Falls and greater Kootenai County market. Panels lock together at a raised seam with all fasteners concealed beneath, leaving no screws on the roof surface, no exposed penetration points that can develop leaks over time.
| Profile | Best For | Key Advantage |
| QuickLoc™ | Residential, barndominium, light commercial | Concealed fastener performance at the most accessible standing seam price point. Most popular panel in our lineup. |
| 1.5” Snap Lock | Residential, moderate-slope commercial | Traditional snap-lock profile with a clean, low-profile rib height. |
| 1.75” Snap Lock | Steeper pitches, architectural residential | Taller rib for stronger drainage and a more pronounced shadow line. |
| Mechanically Seamed | Low-slope commercial, high-spec architectural | Double-locked field seam; the gold standard for low-pitch commercial roofing. |
Links to view these products in detail: QuickLoc™ · 1.5” Snap Lock · 1.75” Snap Lock · Mechanically Seamed
Exposed Fastener: Agricultural, Commercial, and Value Residential
Exposed fastener panels are the most widely installed metal roofing system on the Rathdrum Prairie and throughout Kootenai County. They are structural, fast to install, and cost-effective, making them the right choice for shops, barns, pole buildings, commercial structures, and budget-driven residential projects.
| Profile | Best For | Key Advantage |
| Tuff Rib | Shops, barns, agricultural, utility buildings | Structural; spans purlins without a continuous deck. Lowest cost per square in the lineup. |
| PBR Panel | Post-frame construction, commercial metal buildings | Industry standard for engineered metal building systems. Bearing leg improves structural performance at laps. |
| 7/8” Corrugated | Farmhouse residential, event barns, distinctive commercial | Classic wave profile with strong visual character. Available in Cor-Ten weathering steel. |
| 7.2 Panel | Large commercial and industrial structures | Wide rib spacing for efficient coverage on large-footprint builds. |
Links to view these products in detail: Tuff Rib · PBR Panel · Corrugated · 7.2 Panel
Metal Siding Panels Available in Post Falls
Metal America manufactures a full range of wall panel and siding profiles at our Post Falls facility. Whether the project is a barndominium in Rathdrum, a commercial building in Hayden, or a residential exterior in Post Falls itself, we have the panel and the finish for it.
- Board & Batten: The most requested siding profile in North Idaho. Vertical panel with batten strip, available in all solid colors and all 11 wood-look finishes. View in detail here.
- Shiplap Siding: Horizontal lap profile for farmhouse, residential, and accent applications. View in detail here.
- Double Lap Siding: Staggered horizontal exposure for a more refined residential character. View in detail here.
- Flush Wall / Soffit: Flat contemporary profile for clean architectural cladding and soffit applications. View in detail here.
- PBR Panel: Exposed fastener wall panel for agricultural and utility siding. View in detail here.
Wood-Look Metal Siding Manufactured in Post Falls
Metal America’s wood-look finish collection is one of the most distinctive products manufactured at our Post Falls facility. Eleven finishes, including Barnwood, Smooth Cedar, Gray Oak, Walnut, Rough Cedar Gray, Burnt Wood Charcoal, and more, are printed at 8K resolution directly onto steel panels and sealed under our 40-year WeatherXL™ SMP coating.
These finishes are exclusive to Metal America. They are not available through distributors, national chains, or any other supplier in the region. If you want wood-look metal panels in North Idaho, Post Falls is where you come. Read our full guide
Serving the Post Falls and Rathdrum Prairie Construction Market
Post Falls and the Rathdrum Prairie are among the fastest-growing construction markets in Idaho. New residential developments, commercial corridors along Seltice Way and Mullan Avenue, industrial growth near the freeway, and ongoing agricultural and rural construction throughout the Prairie all represent active demand for metal building materials.
Metal America’s Post Falls location is positioned at the center of this market. We’re the closest metal panel manufacturer to every job site in Kootenai County, and we’re set up for the volume that this market demands: with on-site rolling capability, broad standard stock, and the capacity to fulfill large orders on short timelines.
Project Types We Regularly Supply in the Post Falls Area
- New residential construction: standing seam roofing and Board & Batten siding on custom homes and production builds throughout Post Falls, Rathdrum, and Hayden
- Barndominium and shop house builds: the fastest-growing segment in the area, typically combining standing seam roofing with wood-look Board & Batten siding
- Agricultural buildings: equipment storage, hay barns, and livestock facilities on the Rathdrum Prairie using Tuff Rib and PBR panel systems
- Commercial construction: metal roofing and siding on retail, industrial, and mixed-use structures throughout the Post Falls commercial corridors
- Reroof projects: metal panel replacement on aging asphalt shingle roofs throughout Kootenai County
- Pole barn and post-frame structures: PBR panel and Tuff Rib on the full range of post-frame applications common to the region
Metal Roofing for the Post Falls and North Idaho Climate
Post Falls sits at approximately 2,150 feet in the Spokane River valley. The climate combines meaningful winter snowfall, hard freeze-thaw cycling through the shoulder seasons, and UV-intense summers. Metal America panels are built for exactly these conditions.
Snow Load
Kootenai County’s ground snow load is a real design consideration for any roofing project. Metal panels , particularly standing seam profiles, shed snow more cleanly than asphalt shingles because the surface has no exposed fastener heads to catch and hold ice. For projects at higher elevations above the valley floor, or for larger structural spans, 24 gauge steel is the recommended choice. Our Post Falls team can advise on gauge selection for your specific site and building type.
Freeze-Thaw Performance
Post Falls goes through hundreds of freeze-thaw cycles each year. Asphalt shingles absorb moisture and degrade under this cycling, losing granules, cracking, and developing edge curl over time. Metal panels do not absorb moisture. There is nothing to expand and contract in ways that degrade the material. The WeatherXL™ SMP coating is warranted for 40 years, covering color retention and surface adhesion through the full cycle of North Idaho seasons.
Wind and Weather Events
The Post Falls and Rathdrum Prairie area can experience significant wind events, particularly in open agricultural settings where structures have high exposure. Standing seam panels have strong wind uplift ratings that exceed most exposed fastener systems. For commercial structures or any build in an exposed location, discuss wind uplift requirements with our team and we’ll spec the appropriate profile and attachment system.
Post Falls Service Area
Our Post Falls facility is the primary supply point for metal roofing and siding projects throughout Kootenai County and the broader North Idaho region. Walk in for same-day pickup or contact us to arrange delivery.
| City / Area | County / State | Approx. Distance |
| Post Falls | Kootenai, ID | Our location |
| Rathdrum | Kootenai, ID | ~10 min north |
| Coeur d’Alene | Kootenai, ID | ~10 min east |
| Hayden | Kootenai, ID | ~15 min east |
| Dalton Gardens | Kootenai, ID | ~15 min east |
| Spirit Lake | Kootenai, ID | ~20 min north |
| Athol | Kootenai, ID | ~20 min north |
| Liberty Lake, WA | Spokane, WA | ~20 min west |
| Spokane Valley, WA | Spokane, WA | ~30 min west (also our location) |
| Sandpoint | Bonner, ID | ~45 min north |
| Moscow | Latah, ID | ~75 min south |
Metal America delivers throughout Idaho, Washington, Oregon, and Montana. Contact us at 855-638-2587 for delivery options on projects outside of standard pickup range.
What Contractors Say About Metal America Post Falls
★★★★★
“In our business, reliability matters just as much as craftsmanship. Metal America consistently delivers both. Their combination of product quality, design variety, dependable supply, and outstanding customer support has made them an integral part of our operations and a trusted partner in our continued growth.”
— Dan Neace, Triple 5 Construction
★★★★★
“As the owner of MaxForce I worked closely with the team at Metal America to design and install the first all metal printed fence. The entire team was professional, easy to work with, and helped every step of the way. If you are interested in a fence or metal for your project, I would highly recommend Tim or any member of the team at Metal America.”
— Rob Egusquiza, MaxForce
★★★★★
“I appreciate the people at Metal America because they know what they’re talking about when you call to order something. They have everything we need for metal building work and more.”
— Mark Avena, Charis Construction Inc.
★★★★★
“Metal America has been our go-to for every roofing job in the Panhandle for the past three years. The Post Falls team knows their product inside and out. Lead times are short, pricing is fair, and the quality doesn’t vary order to order. That consistency is everything in this business.”
— Roofing Contractor, Coeur d’Alene, ID
Metal America Post Falls: FAQ
Where exactly is Metal America in Post Falls?
Metal America is located at 7728 Corn Maze Way, Post Falls, ID 83854. We are open Monday through Thursday 7 AM–4 PM and Friday 7 AM–2 PM. Walk-ins are welcome during all business hours. Google Maps: search “Metal America Post Falls” or use the address directly.
Is Metal America a manufacturer or a distributor?
Metal America is a manufacturer. We own and operate our own steel coil processing equipment at our Post Falls facility. Every panel is rolled in-house from steel coil. We do not purchase pre-formed panels from a third party and resell them. This is the reason our pricing is competitive and our turnaround is fast, there is no distributor layer in the supply chain.
Can I pick up metal roofing panels same day in Post Falls?
Yes, for standard stock items. We maintain inventory of our most popular panel profiles, gauges, and colors at the Post Falls location. Call ahead at 855-638-2587 to confirm availability on the specific product you need before making the drive. Custom lengths and specialty finishes are typically available within a few business days.
What is the most popular metal roofing panel for Post Falls area residential projects?
QuickLoc™ standing seam is the most popular residential roofing panel in the Post Falls and North Idaho market. It delivers concealed fastener performance at the most accessible price point in our standing seam lineup and is on more residential roofs in this region than any other Metal America profile. For agricultural and commercial projects, PBR Panel and Tuff Rib are the standard choices.
Does Metal America sell to homeowners, or only contractors?
Both. No contractor license is required to purchase from Metal America. Homeowners, owner-builders, and DIY builders are welcome at our Post Falls location and receive the same expert assistance as professional contractors. A significant portion of our business is owner-builder barndominium and shop projects.
What wood-look siding finishes are available for pickup in Post Falls?
All 11 wood-look finishes are available through our Post Falls location, including Barnwood, Smooth Cedar, Gray Oak, Rough Cedar Gray, Walnut, Burnt Wood Charcoal, Burnt Wood Black, Chippy White, Pecky Cypress, Primitive Pine Plank, and Gray Wash Barnwood Plank. Physical samples of all finishes are available in-store.
Can Metal America deliver to job sites near Post Falls?
Yes. Metal America delivers to job sites throughout Kootenai County and the broader North Idaho, Eastern Washington, Oregon, and Montana region, with the ability to ship nationally.
Does Metal America Post Falls carry garage doors and fencing?
Yes. In addition to roofing and siding panels, Metal America manufactures custom metal garage doors available in multiple design profiles and finishes, as well as metal fencing products.
Is Metal America in Post Falls the same company as Metal America in Texas?
No. Metal America® (metalamerica.com) is a family-owned company founded and headquartered in Post Falls, Idaho. We are a completely separate and independently owned company from any similarly named business in Texas or any other state. We are the Pacific Northwest’s metal roofing and siding manufacturer, serving Idaho, Washington, Oregon, and Montana directly with nationwide shipments.
Visit Metal America in Post Falls
Our Post Falls facility is where Metal America panels are made and where you can pick them up the same day. Come in to see samples, talk through your project with someone who knows the product, and leave with a quote or materials in hand. No appointment needed.
- Phone: 855-638-2587
- Email: sales@metalamerica.com
- Quote Request: fill out the form below or visit our contact page
- Address: 7728 Corn Maze Way, Post Falls, ID 83854
- Hours: Mon–Thu 7 AM–4 PM | Fri 7 AM–2 PM | Walk-Ins Welcome
Metal America® is a registered trademark. All panels manufactured at our Post Falls, ID facility. © 2026 Metal America. All rights reserved.
Get a Quote
Find the Best Panel for Your Next Project
Fill out the form below and our team will get back to you within 24 hours with pricing and availability.
E-mail
sales@metalamerica.com
Phone number
855-638-2587